RS
- 232 Serial Interface
- Data Rate : 300 - 115200
bps
- Character : 7 or 8 bits
- Parity : Odd / Even / None
- Stop Bit : 1 or 2 bits
- Flow Control : None
10
Base-T Ethernet interface
- RJ45 Connector with LED indicator.
- Protocol : ARP, ICMP, TCP/IP,
HTTP
Device
configuration
- Web Browser.
- Windows Utility.
Security
Device driver
- Optional 128 bit AES Encryption
Device
driver
- Virtual COM Port of Windows
OS
JAMP
II is single board
computer (SBC), power by high
performance ARM9 CPU. It features
low cost, flexible connectivity,
rich of peripheral and complete
all in one solution for web
base control application.
This board has Linux operating
system integrate in it so
user can easily develop there
application software or can
port many pre build application
that available on internet.
Features:
ARM9
AT9RM92000 CPU that
run on frequency up
to 180 MHz
32Meg
x 32 SDRAM memories
for CPU that operate
in frequency up to 90
MHz
2Meg
x 16 Parallel Flash memory
2Meg
x 8 SPI Flash memory
1M-bit
I2C EEPROM
One
USB 2.0 Full Speed Host
port
One
USB 2.0 Full Speed Device
port
One RS-232
debug port, can use for
dedicate debug function
or general purpose UART
port
One RS-232/RS-485
port, jumper selectable
mode
One EBI
bus expansion port for
add one card that can
utilize full function
of Static Memory Controller
in ARM9
FPGA I/O
Bridge, functions as display
adapter, PS/2 (mouse and
keyboard) controller and
GPIO controller. Make
it ideal for custom change
One SVDO
port support NTSC and
PAL in all format
One VGA
max resolution 1280 x
1024 at refresh rate 85
Hz
One ATA
IDE 40pin port, support
multiword DMA mode
One SD-card
socket that support both
SD-card and MMC-card
One CF
port
One Ethernet
10/100 port, RJ-45 connector
Two PS/2
port for mouse and keyboard
Linux
base operating system
(Linux 2.6.x)
Portable
and small size control
unit so it can be used
in mobile application
